Welcome to Sielco Sistemi Store!
The device SS10018 converts up to 8 analogue input signals into engineering units in digital format. The data are transmitted with MODBUS RTU/ASCII protocol over the RS-485 network.
It is possible to connect on input 8 voltage signals up to ± 250 mV or thermocouples sensor type B, E, K, J, N, R, S, T. By programming, it is possible to execute the scaling of the measure of input up to ± 32768 points obtaining in the dedicated registers the measure of the channel in the desired format.
The device guarantees high accuracy and stable measure versus time and temperature.
To ensure the plant safety, a Watch-Dog timer alarm is provided.
The isolation between the parts of circuit removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.
The device is housed in a 6 module DIN rough self-extinguishing plastic box for mounting on EN-50022 standard DIN rail.
Datasheet SS 10018
User Guide SS 10018
IOlog series illustrative leaflet
CE Certificate
Industrial I/O Modules
Communication protocol | Modbus ASCII, Modbus RTU, Modbus TCP (using SS10580 converter) |
---|---|
Insulation voltage | 1500 Vca @ 50 Hz for 1 minute between inputs, outputs, serial and supply |
EMC Immunity | conform to EN 61000-6-2 |
EMC Emissions | conform to EN 61000-6-4 |
Supply voltage | from 10 to 30 VDC |
Maximum current consumption | 45 mA @ 24 VDC |
Polarity inversion protection | maximum 60 VDC |
Temperature | operating environment from -10 to +60 ºC |
Humidity | operating environment from 0 to 90 % (non condensing) |
Storage temperature | from -40 to +85 ºC (without ice) |
Material | self-extinguishing plastic |
Mounting | on EN-50022 DIN rail |
Weight | about 200 g |
The device SS10018 converts up to 8 analogue input signals into engineering units in digital format. The data are transmitted with MODBUS RTU/ASCII protocol over the RS-485 network.
It is possible to connect on input 8 voltage signals up to ± 250 mV or thermocouples sensor type B, E, K, J, N, R, S, T. By programming, it is possible to execute the scaling of the measure of input up to ± 32768 points obtaining in the dedicated registers the measure of the channel in the desired format.
The device guarantees high accuracy and stable measure versus time and temperature.
To ensure the plant safety, a Watch-Dog timer alarm is provided.
The isolation between the parts of circuit removes eventual ground-loop effects, allowing the use of the device even in the heavy environmental conditions.
The device is housed in a 6 module DIN rough self-extinguishing plastic box for mounting on EN-50022 standard DIN rail.
Datasheet SS 10018
User Guide SS 10018
IOlog series illustrative leaflet
CE Certificate
Industrial I/O Modules
Communication protocol | Modbus ASCII, Modbus RTU, Modbus TCP (using SS10580 converter) |
---|---|
Insulation voltage | 1500 Vca @ 50 Hz for 1 minute between inputs, outputs, serial and supply |
EMC Immunity | conform to EN 61000-6-2 |
EMC Emissions | conform to EN 61000-6-4 |
Supply voltage | from 10 to 30 VDC |
Maximum current consumption | 45 mA @ 24 VDC |
Polarity inversion protection | maximum 60 VDC |
Temperature | operating environment from -10 to +60 ºC |
Humidity | operating environment from 0 to 90 % (non condensing) |
Storage temperature | from -40 to +85 ºC (without ice) |
Material | self-extinguishing plastic |
Mounting | on EN-50022 DIN rail |
Weight | about 200 g |