Welcome to Sielco Sistemi Store!

SS 10580 Isolated Ethernet Gateway Modbus TCP / Modbus RTU

Be the first to review this product

Availability: In stock

€220.00

Quick Overview

Converter from Modbus TCP Ethernet to Modbus RTU RS485

NEW
SS10580

  • Details

    General description

    The device SS10580 allows to connect all the devices with Modbus RTU of a RS-485 serial line to the Ethernet with Modbus TCP protocol.
    By the integrated web server it is possible to configure the option of Modbus TCP ( IP address, subnet mask, etc..) and Modbus RTU (baud rate, etc...).
    The device realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.
    The LEDs of signalling of Ethernet and the serial line communication activity and power supply allow a direct monitoring of the system functionality.
    The connection is made by removable screw-terminals (inputs and power supply) and RJ45 plug (Ethernet).
    The device is housed in a 2 module DIN rough self-extinguishing plastic box for mounting on EN-50022 standard DIN rail.

    Main features

    • Interface Ethernet 10/100 Base-T Modbus TCP
    • RJ45 Connector
    • Configuration via integrated web server
    • Serial interface RS-485
    • Modbus RTU Master
    • Baud rate up to 115.2 Kbps
    • Distance up to 1200 m, up to 32 modules connected in multipoint
    • Connection by removable screw-terminals
    • LED signalling for Link/Act Ethernet, power supply
    • Galvanic isolation on all the ways
    • EMC compliant – CE mark
    • In compliance to EN-50022 DIN rail mounting

    Manuals and guides

    Datasheet SS 10580Datasheet SS 10580
    IOLOG LeafletIOlog series illustrative leaflet
    IOLOG LeafletCE Certificate
    Webser I/O ModulesIndustrial I/O Modules

  • Additional Information

    Communication protocol Modbus ASCII, Modbus RTU, Modbus TCP (using SS10580 converter)
    Insulation voltage 1500 Vca @ 50 Hz for 1 minute between inputs, outputs, serial and supply
    EMC Immunity conform to EN 61000-6-2
    EMC Emissions conform to EN 61000-6-4
    Supply voltage from 10 to 30 VDC
    Maximum current consumption 45 mA @ 24 VDC
    Polarity inversion protection maximum 60 VDC
    Temperature operating environment from -10 to +60 ºC
    Humidity operating environment from 0 to 90 % (non condensing)
    Storage temperature from -40 to +85 ºC (without ice)
    Material self-extinguishing plastic
    Mounting on EN-50022 DIN rail
    Weight about 200 g
  • Tags

Details

General description

The device SS10580 allows to connect all the devices with Modbus RTU of a RS-485 serial line to the Ethernet with Modbus TCP protocol.
By the integrated web server it is possible to configure the option of Modbus TCP ( IP address, subnet mask, etc..) and Modbus RTU (baud rate, etc...).
The device realizes a full electrical isolation between the lines, introducing a valid protection against the effects of all ground loops eventually existing in industrial applications.
The LEDs of signalling of Ethernet and the serial line communication activity and power supply allow a direct monitoring of the system functionality.
The connection is made by removable screw-terminals (inputs and power supply) and RJ45 plug (Ethernet).
The device is housed in a 2 module DIN rough self-extinguishing plastic box for mounting on EN-50022 standard DIN rail.

Main features

  • Interface Ethernet 10/100 Base-T Modbus TCP
  • RJ45 Connector
  • Configuration via integrated web server
  • Serial interface RS-485
  • Modbus RTU Master
  • Baud rate up to 115.2 Kbps
  • Distance up to 1200 m, up to 32 modules connected in multipoint
  • Connection by removable screw-terminals
  • LED signalling for Link/Act Ethernet, power supply
  • Galvanic isolation on all the ways
  • EMC compliant – CE mark
  • In compliance to EN-50022 DIN rail mounting

Manuals and guides

Datasheet SS 10580Datasheet SS 10580
IOLOG LeafletIOlog series illustrative leaflet
IOLOG LeafletCE Certificate
Webser I/O ModulesIndustrial I/O Modules

Additional Information

Communication protocol Modbus ASCII, Modbus RTU, Modbus TCP (using SS10580 converter)
Insulation voltage 1500 Vca @ 50 Hz for 1 minute between inputs, outputs, serial and supply
EMC Immunity conform to EN 61000-6-2
EMC Emissions conform to EN 61000-6-4
Supply voltage from 10 to 30 VDC
Maximum current consumption 45 mA @ 24 VDC
Polarity inversion protection maximum 60 VDC
Temperature operating environment from -10 to +60 ºC
Humidity operating environment from 0 to 90 % (non condensing)
Storage temperature from -40 to +85 ºC (without ice)
Material self-extinguishing plastic
Mounting on EN-50022 DIN rail
Weight about 200 g

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.


© 2016 Sielco Sistemi Store. All Rights Reserved. P.IVA IT02854460132