SS10000 includes a series of data acquisition modules with a RS485 interface and a Modbus RTU/ASCII protocol, featuring a low-profile format which makes them suitable for DIN rail mounting inside industrial electrical cabinets.
This line also includes the IoT SS10680 gateway which allows modules to be integrated into an IoT architecture.
All devices guarantee highly accurate and stable measurements over time, also in the presence of temperature changes.
A dual Watch-Dog (hardware and software) controls the proper CPU operation and sets outputs to safety values in case of communication failure. Device configuration is provided via software.
Signalling leds allow an immediate diagnosis of device operation. Electrical connections are available via plug-in screw terminals.
The full galvanic isolation ensures a good protection against interference present in industrial environments.
|Data transmission (asynchronous serial)
|Electromagnetic compatibility (EMC)
|Analog module with 4 RTD inputs
|Analog module with 4 voltage e 4 current inputs
|Analog module with 4 thermocouple inputs,
|Analog module with 8 current inputs
|Analog module with 8 voltage inputs
|Analog module with 8 thermocouple inputs
|Digital module with 8 digital inputs and 4 relay outputs
|Digital module with 16 digital inputs
|Digital module with 8 digital inputs and 8 open-collector outputs
|Converter from Modbus TCP Ethernet to Modbus RTU RS485
|Modbus / MQTT IoT Gateway